|
SATA Hotswap Trays and Bays
Cremax Hotswap Bays and Trays. These come in three different packaging:
- Complete Bay+Tray - This is the mobile rack plus drive
tray together. Comes in standard (LED Lights) or LCD (LCD Display)versions. Includes
drive and bay installation screws plus tray locking key.
- Tray Only - LCD and Standard LED versions. Includes screws.
- Replacement Bay Only - Drive bay without tray. This is a
replacement part. Standard LED or LCD versions.
- Trayless Bays - complete bay that accepts bare drives without
any tray. Accepts SATA drives. Insert the drive - connector end first, close
the door and it makes the connection. Open the door it hands you the drive.
Note: LCD trays will not work in standard bays. The reverse does work, standard trays work
perfectly in LCD bays. So if you have an LCD equipped enclosure you can purchase additional
LCD or standard trays. If you have a standard tray equipped enclosure you can only use
standard trays.
Bay + Tray - complete unit, bay is attached inside Burly, tray inserts into bay and holds drive
|
|
|
|
Spare Drive Trays
|
|
|
|
Bay ONLY - component replacement bay with fan
|
|
|
|
Trayless Bay
|
|
|
|
Old Style SATA Hotswap Trays and Bays
The old style (in use 2005 and earlier Burly) generally look the same
except
are
over
an
inch longer than new style. These trays have an interface board in the back with
a
separate
connector
to connect to the bay. (new trays have a small opening for the drive's connectors
to interface directly to the back of the bay) Picture to right shows rear view
of old
style versus the current version which is listed above.
Note drive connectors visible at botttom left of new style tray.
- Complete Bay+Tray - This is the bay unit plus drive
tray together. Comes in standard (LED Lights) - LCD no longer available (LCD
Display)versions. Includes
drive and bay installation screws plus tray locking key.
- Tray Only - LCD and Standard LED versions.
Includes drive screws. No cross compatibility between standard and LCD.
|
|
|
|
Burly Enclosures
Burly steel enclosure - bare, black in color unless otherwise noted.
Comes with installed power supply, fans and ext. power cable. Does not
include drives, mounting brackets, data cables,
bridges or any other internal or external components.
|
|
|
|
|
|
|
|
|
|
|
|
Power Supplies
- PD-PS40 replacement power supply for current Burly 1 Bay Enclosures
- TT-80wattPS - 80 Watt PS is for 2 and 3 bay Burly enclosure
Note:Replacement power supply with attached wiring harness (no switch)
- TT-PS300 replacement for Burly 4, 5 and 8 Bay Tower and pre 2007
Burly Rack Mount Enclosures
Note:
Click here to see Picture to identify Rack Mount enclosure for this replacement
power supply
Power supply includes attached wiring harness and power switch
- TT-PS400 400 WATT upgrade replacement power supply for Burly with 300 WATT power supply listed above.
- TTi-PS500RM 500 WATT replacement for current rack mount enclosure only
|
|
|
|
|
|
|
|
|
|
FANS - original replacment and high quality upgrade replacements
- MAP-CASEFAN - 80MM, 2700 RPM original replacement fan is drop in
replacement
for
2,3,4,5,and 8 bay Burly Tower enclosures.
- Vantec 8025 80 MM fan is a high tech, low noise replacement
upgrade for all 80MM requirements. Has 4 pin Molex pass-through connector. Can be used to upgrade fans from original MAP-CASEFAN.
- Vantec 12025 120 MM fan is high tech, low noise replacement
fan for the
120 MM Rack Mount enclosure fan.
Has
a 4 pin Molex pass-through connector.
|
|
|
|
|
|
Firewire Bridges
- FW934 Oxford 934 - Firewire 800 - USB2 to SATA Hard Drive Bridge Board
on Centronics mounting plate. Board has 1 usable JBOD internal SATA port. Also can attach 2 drives but only in RAID0 or RAID1. Useable with any capacity drives. If used in a 2 drive RAID then drives should be same capacity.
- DOIF8UC-S Oxford 924 - Firewire 800 - USB2 to SATA Hard Drive Bridge Board
on Centronics mounting plate. Board has 2 internal SATA ports and can connect 1 or 2 drives. Maximum drive capacity is 2TB per drive
- JM202 JMicron Firewire/USB to SATA Port Multiplier on centronics plate.
Can connect to up to 5 drives through port multiplier JPM393 sold below. Firewire bridge has single internal SATA port that will only connect to drives though SATA port multiplier. Supports any drive capacities.
FW934 Single Drive Bridge
 |
DOIF8UC-S Oxford 924
 |
JM202 JMicron
 |
|
|
|
|
|
|
Port Multiplier replacement boards and upgrade kits
Port Multiplier boards uss 3726 Silicon Image chip set. Incorporates 5
internal SATA connections to connect up to 5 SATA drives, and either 1 eSATA external
connection or one internal 'host' connector for use with a FW to SATA port multiplier bridge. Boards are mounted on a plate that will
attach to a Centronics cutout in the back of the Burly enclosures.
- ST-126RM Replacement Port Multiplier - eSATA host port - bare replacement board on centronics bracket.
- JPM393 Port Multiplier board - internal host port bare board with built in RAID controller on Centronics bracket. Can combine with UF-SATA202 FW USB board. JBOD, RAID0, RAID1, RAID3 and RAID5 capable. Performance is best in JBOD.
- ST-126L Replacement Port Multiplier - internal host port - bare board
- MGBurlyFPM-upg Firewire upgrade kit - Includes UF-SATA202 Firewire bridge, ST-126L internal port multiplier board and 6 SATA drive cables.(one to connect Firewire board to PM board)
- Port Multiplier Upgrade Kit - Includes ST126RM Port Multipler
board, power adapter cable and 5 SATA drive cables.
Port Multiplier Upgrade Kit
 |
Firewire PM Upgrade Kit
|
|
|
|
|
|
|
|
|
|
