Step 18b: LED Connectors



Another View of the Drive Activity LED Wires on the Cheetah.

Again, the colored wire generally goes on the top pin, and the black ground wire generally goes on the bottom pin.

RAID Tutorial by magician. Photos by Frank T.

Attaching Your LED Connectors

1. As mentioned, you can place a small dab of hot glue from a glue gun on the plastic surfaces to secure the LED wires to the drive. Definitely do this if your LED connectors are loose on the pins. You might want to make sure your drive lights flash correctly before doing so.

The Gurus Certify
These Instructions Work