Step 12: Doublechecking



Make sure your GD4197 68-pin to 50-pin Plate Adapters are screwed securely
into the backplane of the MAP5021 Dual-Bay Burly Enclosure.

Screw them in a little more than finger-tight. Double-check the barrel connectors, too.

RAID Tutorial by magician. Photos by Frank T.

Double-checking Your Work

1. A good technician is never afraid to double-check. Make sure all screws and barrel connectors in the backplane are snug. Tighten just beyond finger-tight.

The Gurus Certify
These Instructions Work