Search
Click here to Search by Part Number
Store Index
Memory
MacGurus RAM
SATA (Serial ATA)
Host Cards
Burly Enclosures
Cables
Hard Drives
RAID
Burly Hardware RAID
SuperDrive
Burly DVD-R Burner
SCSI
SCSI-Firewire Adapters
FireWire
Case Kits and Drives
Multi-Drive Enclosures
Host Cards
FW 400 Cables
FW 800 Cables
Enclosure Parts
Burly Parts
Hard Drives
SATA Hard Drives
Notebook Hard Drives
MacBooks
Express34 and Cardbus Expansion Cards
Momentus Drives
Special Deals
Specials&Closeouts
Rick’s Blogs
SATA III
Burly Maintenance
Why a Burly?
Tech Guides
Guides to Acceleration
Building a Photo Database
Storage Acceleration
Photoshop Acceleration
Storage Guides
DeskTop Drive Setup
Preparing New Drives
Move Users 10.5
Move Users 10.4
Port Multiplication Guide
Table - Front Side Bus
Giga CPU Upgrade
Roll Your Own SATA
Hot Swap SATA Guide
Roll Your Own RAID
Motherboard Layouts
Drive & RAID Database
|
MacGurus Burly
with Plextor DVD SuperDrive
Firewire/USB2.0 or eSATA
How good does it get? I'll tell you - match up the awesome Burly 1 Bay
enclosure with
the blazing fast Plextor SuperDrive and you have the best Burner on the
planet.
This combination is plug and play simple to use with
Macs or PCs. Gives unparalleled performance on any bus. Select your choice
of either a Burly One Bay with an eSATA connection or
a Burly with Firewire 1394b and USB2.0 connections on
the back. We'll include the external cables as well so you can plug into
just about any computer imaginable.
The Burly comes with an internal power supply and cooling fan. This will
provide the cleanest desktop with no brick power supply to add to your
collection. And the Burly is future upgradeable with whatever new optical
technology comes out replacing DVD-R and DVD-RAM in the future. For instance
BlueRay when it becomes financially reasonable to use. The Burly One Bay
enclosure will be able to handle most any device you care to use in it down
the line including hard drives.
Plextor SuperDrive
MacGurus has always liked the Plextor burners - going way back to our
SCSI days. This one is no exception. Superior speeds in all categories. Reliable
and natively supported by OSX in both Disk Burn and iDVD. The PX-850SA is
a native SATA drive, so we can attach it directly to any of our SATA enclosures
or
to the
excellent Oxford 924 Firewire USB2 bridge in our Firewire Burly.
Requisite Performance info from Plextor:
The PX-850SA DVD Super Multi Drive supports blazing fast 22X burns on
single layer DVD±R media (4.7 GB), 12X burns
on double/dual layer media (8.5 GB) and 12X on reliable DVD-RAM media.
The PX-850SA DVD Super Multi Drive is the only DVD burner you’ll need to get
the job done right the first time. Download the PDF
Datasheet for full specifications.
Now also available ATA version of this same great drive. Same performance with a 40 pin ATA connector.
Useable as a replacement for original internal DVD/CD drives in your Mac tower. (G3, G4, G5 or MacPro)
Bare SATA or ATA Plextor SuperDrive (choose based on
the bus you intend to attach it to)
Can be installed in your 5.25 inch enclosure or inside your G3, G4, G5 or MacPro
towers.

Burly
+ Plextor DVD with Firewire/USB 2.0 Connection
Works perfectly with Firewire800, Firewire 400
and USB equipped computers.
Specifications:
- Installed Plextor PX-850SA SuperDrive
- Bridge: Oxford 924 - SATA to Firewire 800/USB2
Firewire 800Mb/sec - USB2.0 480Mb/sec
- Power Supply: 60 WATT internal auto sensing 100-240 Volt
- Cooling: 60MM case fan
- Dimensions: 9.8 in. Wide x 11.25 in. Long x 2.6 in. High
- System Requirements:
Macs with OS9 or later and Firewire or USB
PCs with open USB2 or Firewire port
- 1 year warranty
|
Shipping contents:
- Single Bay FW/USB Enclosure with SuperDrive
- 6 ft. Firewire 800 cable
- 6 ft. 6 pin to 9 pin Firewire 400 cable
- 3 ft. USB2 cable
- Power Cable
|
Burly + Plextor DVD with eSATA Connection
Connect to your eSATA or SATA port on any computer.
Note: The connector on the rear of the enclosure is eSATA. This is
the connector that has the straight center piece. If you are connecting to
an internal SATA connector at the computer,
the one with the 'L' shaped internal component, then you should select
one of the eSATA to TypeA cables.
Specifications:
- SATAII 3Gb/sec
- Dimensions: (W x D x H): 9.75 x 11 x 2.6 in.
- Power Supply: internal auto switchable 90 to 264 Volts
- 60mm cooling fan
- Case Connections: 1 x eSATA
- 1 year warranty on power supply and components
- Plextor 1 year warranty
|
Contents:
- Enclosure with installed Plextor SuperDrive
- Power Cable
- 1 or 2 meter shielded external cable - eSATA or eSATA to TypeA
Please select cable type below
|
The Gurus Certify These Burners Rule
|